Disassembly sequence of screw

Injection machine injection screw, the best s...

Parallels with conical twin screw extruder

Differences between parallel and conical twin...

Conical twin screw barrel

Parallel twin screw barrel

Causes of damage to the screw and barrel

The screw rotates in the barrel, and the friction between the material and the two causes

The structural characteristics of several typ...

More CaCO3 content: the gap between the spiral edge and the screw edge is smaller, the pur

What is a plastic injection screw? What are t...

The application of plastic products is closely related to our lives. Injection molding and

How does the screw barrel reduce wear and inc...

1, each plastic material has an ideal plasticizing processing temperature range, so the ba

The main factors affecting the quality of pla...

1. Length to diameter ratio: the ratio of the effective working length of the screw to the

What are the characteristics of the screw?

1. Feeding zone (feeding zone) This section is the ditch depth of the fixed screw groove.

What should I do if the compressed air of the...

The reason for this failure is that due to too much cooling cold filling, the correct posi

What is the use of a single screw extruder?

Single-screw extruder is mainly used for filling, blending, modification, addition, chlori

Exhaust injection molding machine screw speed

In the case of exhaust injection molding, the difference between the vented injection rod

What are the process characteristics of the e...

Process characteristics of the exhaust injection molding machine screw:

12 points to keep in mind the screw barrel of...

1. Match the material with the screw. Especially for corrosive materials and hard material

Injection molding machine screw renovation an...

1. In order to avoid scratches and burns on the surface of the workpiece, special care mus

Routine maintenance of the screw barrel of th...

Principle and type of screw barrel of injecti...