How does Single Screw Barrel extruder power
Single Screw Barrel extruder as a common extruder equipment for the plastics processing industry, but now in our country are mainly high-power, if not energy-saving type, it will consume a lot of resources, but in fact the process of operation , Master some skills, you can do power.
Single-screw extruder in the process of starting the heating are several sections of the temperature at the same time open to start heating, of course, this method is more commonly used, but this will often reach the screw in the temperature after a certain index The head of the temperature has not yet reached (the die of this piece of steel is relatively thick, the area is relatively large), so we in this case is generally the screw insulation, and then wait for the temperature of the die slowly rising to the set temperature Start the boot, Single Screw Barrel this approach is the most power-efficient.
Of course, there is also one need to pay attention to the heating process in this process is actually a simple heating can help you save a lot of energy, heating in a few heating section at the same time, when the screw temperature Set the temperature when you start to remember the time, and then wait for the temperature to reach the set temperature when the time to remember, there is a time gap, that is, the screw reaches the set temperature and die to set the temperature between the set What is the time gap? Find this time difference, Single Screw Barrel the next time you start the time in this time the number of poor ahead of time so long for the die first heating, to reach this time difference and then open the screw heating, this can also save power.